How to Fix Read-Only NVMe-oF Initiator Disk Issue in Windows
Posted: Thu Apr 06, 2023 8:16 am
I am currently facing an issue with loading an NVMe-oF target on Windows using StarWind VSAN. The setup consists of a Windows Server 2022 running the StarWind VSAN to create the NVMe-oF target, and a Windows 11 workstation running the StarWind NVMe-oF initiator to load the disk. Both computers use ConnectX 4 network cards. RDMA functionality and rPerf testing were conducted and found to be functioning correctly.
However, when using the StarWind NVMe-oF initiator to load the disk on the client-side, the disk loads successfully but cannot be formatted. The system prompts that the medium is write-protected, and the status is read-only.
I am looking for advice on how to resolve this read-only disk issue. Any assistance would be greatly appreciated.
Thank you.
However, when using the StarWind NVMe-oF initiator to load the disk on the client-side, the disk loads successfully but cannot be formatted. The system prompts that the medium is write-protected, and the status is read-only.
I am looking for advice on how to resolve this read-only disk issue. Any assistance would be greatly appreciated.
Thank you.