Search
StarWind is a hyperconverged (HCI) vendor with focus on Enterprise ROBO, SMB & Edge

Virtualization: Performance Comparison

  • December 15, 2020
  • 16 min read
Cloud and Virtualization Architect. Kevin focuses on VMware technologies and has vast expertise in cloud solutions, virtualization, storage, networking, and IT infrastructure administration.
Cloud and Virtualization Architect. Kevin focuses on VMware technologies and has vast expertise in cloud solutions, virtualization, storage, networking, and IT infrastructure administration.

Introduction

As you remember from my previous article, I have been interested in testing the performance levels of two virtual SAN configurations from different vendors. I got my results, but this experience prompted me to continue. Here, I’ve chosen to try another configuration for performance comparison, albeit with only a slightly different list of participants.

Since no one needs an introduction from VMware vSAN, I’d like to say a few words about its companion – Ceph. Basically, it is an object-based software storage platform. I know that doesn’t sound epic at all, but Ceph is also completely fault-tolerant, uses off-the-shelf hardware, and is extremely scalable. The most interesting thing is that some Ceph releases apply erasure-coded data pools so that it would be a less resource-hungry solution than traditional replicated pools. In practice, that means the following: when you store an object in a Ceph storage cluster, the algorithm divides this object into data and coding chunks, stored in different OSDs (that way, the system could lose an OSD without actually losing the data).

Now, that’s when I thought that theoretically, Ceph could make a good virtualization platform (proper configuration, of course), so I had to see whether it would be justified in terms of time and resources spent. Naturally, I hardly could have done it without a credible comparison, hence VMware vSAN (with a similar configuration, of course, otherwise it would make no sense).

So, shall we?

choose your fighter

Time to Look Under the Hood!

So, today’s participants are VMware vSAN’s 4-node configuration (RAID5 – erasure coding) and Ceph (Erasure coding 3+1). Keep in mind, though, that my goal is rather to establish if Ceph is up to the task than to determine which configuration gives more performance.

Now it seems to be the time to take a look at the test environment:

Hardware:

node-{01..04} Supermicro X10DRH
CPU2x Intel(R) Xeon(R) CPU E5-2630 v4 @ 2.20GHz
Sockets 2
Cores/Threads 20/40
RAM 64Gb
NIC Mellanox ConnectX-5 MCX456A-ECAT (100 GbE\s)
Storage 6 (SSD) – Intel® SSD DC S4600 Series 480GB

1 (NVMe) – Intel® Optane™ SSD DC P4800X Series 375GB

Software:

VMware ESXi 7.0.0, 16324942
HCIBench 2.4.0
Ceph 14.2.11
VMs – osd,mon,cli CentOS 8.2
FIO 3.7

 

VMware vSAN:

 

VMware vSAN

Attention:

To create a vSAN datastore on each node, you’ll need a disk for caching for each node. The vSAN Storage Policy allows you to stripe an object across disks, so we will require testing parameter “Number of disk stripes per object = 1, 3, 6” as well, to determine the optimal configuration. VMware vSAN stripes data as follows:

vSAN Storage Policy

Ceph:

Ceph

 

Attention:

Each client VM would address a separate 256GB RBD disk. The exclusive-lock & object-map parameters were disabled. On OSD VM NVMe, Intel® Optane™ SSD DC P4800X has been partitioned to 6 50GB logical volumes with bluestore db and wal for Ceph OSD each.

Erasure Coding Pool Parameters:

Ceph Cluster configuration file: ceph.conf.

Testing methods:

VMware vSAN

Testing will be performed with the following configuration: “HCIBench + fio”.

HCIBench will create test VMs with zeroed 100GB disk and launch fio with the following parameters:

Random Read 4k:

Random Write 4k:

Random Read 64k:

Random Write 64k:

The amount of VMs will be increased by 4 each time to establish the highest performance possible.

As usual, HCIBench will keep on clearing the cache after each testing (Clear Read/Write Cache Before Each Testing is the option designed for vSAN users to flush the cache tier before each test case).

As you already know, testing time will differ because VMware vSAN has caching. So, it’ll take some time until it’s clear and ready to go (in the case with All-flash – only write operations).

Ceph

Testing will be performed with the following configuration: “CLI VM + fio”.

Random Read 4k:

Random Write 4k:

Random Read 64k:

Random Write 64k:

Results were as follows:

Test time:

vSAN – 3600 sec;

Ceph – 600 sec;

NVMe and SSD performance testing:

NVMe and SSD performance testing

As declared by the manufacturer:

Declared by the manufacturer

VMware vSAN 16VM with “Number of disk stripes per object = 1,3 and 6” (the amount of disks in each node) parameters performance testing results:

4k random read IOPS4k random write IOPS

According to our test results, “Number of disk stripes per object = 1” is the optimal parameter for this configuration in terms of performance.

VM storage policyVM storage policy rules

VMware vSAN testing results (I only count final results, since vSAN, as you remember, uses caching):

4k random read IOPS4k random read latency (ms)

4k random write IOPS4k random write latency (ms)

64k random read throughput (MB/s)64k random read latency (ms)

64k random write throughput (MB/s)64k random write latency (ms)

VMware vSAN test results:

VMs count pattern jobs iodepth IOPS MB/s latency (ms) CPU USAGE RAM USAGE vSAN PCPU USAGE
12 4k random read 4 8 282074 1101 1,56 49.81% 44.0% 18.1%
4k random write 4 4 58677 229 3,29 41.95% 44.0% 13.32%
4k random read/write (70%/30%) 4 4 130488 509 1,76 47.11% 44.0% 15.46%
64k random read 4 2 41252 2578 2,34 19.09% 44.0% 5.49%
64k random write 4 2 24856 1553 3,86 37.55% 44.0% 12.32%

 

VMs count pattern jobs iodepth IOPS MB/s latency (ms) CPU USAGE RAM USAGE vSAN PCPU USAGE
16 4k random read 4 8 265802 1038 2,09 49.58% 45.0% 17.2%
4k random write 4 4 60928 237 4,27 44.24% 45.0% 14.22%
4k random read/write (70%/30%) 4 4 133302 520 2,33 49.41% 45.0% 16.24%
64k random read 4 2 46071 2879 2,81 21.25% 45.0% 6.15%
64k random write 4 2 25679 1604 4,98 39.62% 45.0% 13.4%

 

VMs count pattern jobs iodepth IOPS MB/s latency (ms) CPU USAGE RAM USAGE vSAN PCPU USAGE
20 4k random read 4 8 255010 996 2,52 51.22% 47.0% 17.86%
4k random write 4 4 57669 225 5,65 43.7% 46.75% 14.07%
4k random read/write (70%/30%) 4 4 133414 521 2,96 50.78% 46.75% 16.42%
64k random read 4 2 51322 3207 3,13 23.96% 46.75% 7.16%
64k random write 4 2 26400 1605 6,06 41.41% 46.75% 13.74%

 

VMs count pattern jobs iodepth IOPS MB/s latency (ms) CPU USAGE RAM USAGE vSAN PCPU USAGE
24 4k random read 4 8 246415 962 3,13 51.32% 48.44% 17.8%
4k random write 4 4 59177 231 6,69 45.9% 47.79% 14.56%
4k random read/write (70%/30%) 4 4 120857 472 3,80 48.93% 48.0% 16.08%
64k random read 4 2 52944 3308 3,63 25.0% 48.0% 7.48%
64k random write 4 2 26034 1627 7,37 41.72% 48.0% 13.72%


Ceph testing results:

<thCPU OSD USAGECPU CLIENT USAGE

pattern jobs iodepth IOPS MB/s latency (ms)
4k random read 8 16 56500 220,6 9,00 75,00% 32,00%
4k random write 8 8 14961 58,4 17,08 80,00% 11,00%
64k random read 8 16 39099 2444 13,07 72,00% 28,00%
64k random write 8 8 13358 836 19,12 78,00% 13,00%

It becomes apparent that Ceph erasure coding operations require a lot of CPU resources, so that’s pretty much the only thing that counts on OSD VMs.

OSD VMs CPU  (random read 4k):

OSD VMs CPU  (random read 4k)

OSD VMs CPU  (random write 4k):

OSD VMs CPU  (random write 4k)

VMware vSAN vs Ceph:

VMware vSAN (16 VMs) Ceph Comparison
pattern IOPS MB/s latency (ms) IOPS MB/s latency (ms) IOPS MB/s latency (ms)
4k random read 265802,25 1038 2,09 56500 220,6 9,00 20,03% 20,04% 576,92%
4k random write 60927,55 237 4,27 14961 58,4 17,08 24,56% 24,64% 400,00%
64k random read 46070,91 2879 2,81 39099 2444 13,07 73,85% 73,88% 360,06%
64k random write 25678,6 1604 4,98 13358 836 19,12 50,60% 50,67% 315,43%

Conclusions

Well, the results are definitive, but the conclusions are not as simple. VMware vSAN showed impressive performance of erasure coding operations, and even though Ceph manufacturers do give some explanation in that regard (look for “How fast is it?”), it still is slower.

However, since the speed is practically the only issue, whether to use Ceph or not is up to you. You got results and everything you need, and I only hope that my work was of any use.

Found Kevin’s article helpful? Looking for a reliable, high-performance, and cost-effective shared storage solution for your production cluster?
Dmytro Malynka
Dmytro Malynka StarWind Virtual SAN Product Manager
We’ve got you covered! StarWind Virtual SAN (VSAN) is specifically designed to provide highly-available shared storage for Hyper-V, vSphere, and KVM clusters. With StarWind VSAN, simplicity is key: utilize the local disks of your hypervisor hosts and create shared HA storage for your VMs. Interested in learning more? Book a short StarWind VSAN demo now and see it in action!